EasyCut Blade Technology and Getting the Can to Catch
The EC500W works like most countertop electric openers. You set the can's rim under the levered top piece and press down, the blade pierces the lid, and the motor turns the can in place while the stainless steel blade cuts around it. BLACK+DECKER calls this EasyCut Blade Technology, and a magnet holds the lid so it lifts clear when you release the can. When it works, it is easy: it simply runs until the can is open. The problems come at the start of the cycle. Can locking and can placement are its worst aspects, and the cut itself can be unreliable too. The pattern is that the rim has to be seated just right under the blade before you press. There is a learning curve, and it can be harder to load than other electric openers, though it works once the can is on. Expect a few practice goes before it becomes second nature.