Never Miss Another Deal!

No Fuss Deal Surprise Me

Creality K1 3D Printer Review: Fast and Well-Specified, With a Heat-Creep Warning

The Comgrow Creality K1 Printer is a fast enclosed printer with a heat-creep warning, best for beginners. Rated 4.3 out of 5 across 9,983 user ratings. The main drawback: owner feedback specific to the K1 is still thin. We scored it 4.1 out of 5.

By ZappyZep, Tech Editor Published December 19, 2025 Updated September 26, 2026
4.1Our score
Creality K1 3D Printer with Auto Leveling 600mm/s Printing Speed 2000mm/s² Acceleration, 300℃ High-Temp 32mm³/s Flow Hotend Dual-Gear Direct Extruder Build Volume 8.66x8.66x9.84 inch Creality K1 3D Printer with Auto Leveling 600mm/s Printing Speed 2000mm/s² Acceleration, 300℃ High-Temp 32mm³/s Flow Hotend Dual-Gear Direct Extruder Build Volume 8.66x8.66x9.84 inch, view 2 Creality K1 3D Printer with Auto Leveling 600mm/s Printing Speed 2000mm/s² Acceleration, 300℃ High-Temp 32mm³/s Flow Hotend Dual-Gear Direct Extruder Build Volume 8.66x8.66x9.84 inch, view 3 Creality K1 3D Printer with Auto Leveling 600mm/s Printing Speed 2000mm/s² Acceleration, 300℃ High-Temp 32mm³/s Flow Hotend Dual-Gear Direct Extruder Build Volume 8.66x8.66x9.84 inch, view 4 Creality K1 3D Printer with Auto Leveling 600mm/s Printing Speed 2000mm/s² Acceleration, 300℃ High-Temp 32mm³/s Flow Hotend Dual-Gear Direct Extruder Build Volume 8.66x8.66x9.84 inch, view 5 Creality K1 3D Printer with Auto Leveling 600mm/s Printing Speed 2000mm/s² Acceleration, 300℃ High-Temp 32mm³/s Flow Hotend Dual-Gear Direct Extruder Build Volume 8.66x8.66x9.84 inch, view 6 Creality K1 3D Printer with Auto Leveling 600mm/s Printing Speed 2000mm/s² Acceleration, 300℃ High-Temp 32mm³/s Flow Hotend Dual-Gear Direct Extruder Build Volume 8.66x8.66x9.84 inch, view 7 Creality K1 3D Printer with Auto Leveling 600mm/s Printing Speed 2000mm/s² Acceleration, 300℃ High-Temp 32mm³/s Flow Hotend Dual-Gear Direct Extruder Build Volume 8.66x8.66x9.84 inch, view 8 Creality K1 3D Printer with Auto Leveling 600mm/s Printing Speed 2000mm/s² Acceleration, 300℃ High-Temp 32mm³/s Flow Hotend Dual-Gear Direct Extruder Build Volume 8.66x8.66x9.84 inch, view 9 Creality K1 3D Printer with Auto Leveling 600mm/s Printing Speed 2000mm/s² Acceleration, 300℃ High-Temp 32mm³/s Flow Hotend Dual-Gear Direct Extruder Build Volume 8.66x8.66x9.84 inch, view 10 Creality K1 3D Printer with Auto Leveling 600mm/s Printing Speed 2000mm/s² Acceleration, 300℃ High-Temp 32mm³/s Flow Hotend Dual-Gear Direct Extruder Build Volume 8.66x8.66x9.84 inch, view 11 Creality K1 3D Printer with Auto Leveling 600mm/s Printing Speed 2000mm/s² Acceleration, 300℃ High-Temp 32mm³/s Flow Hotend Dual-Gear Direct Extruder Build Volume 8.66x8.66x9.84 inch, view 12 Creality K1 3D Printer with Auto Leveling 600mm/s Printing Speed 2000mm/s² Acceleration, 300℃ High-Temp 32mm³/s Flow Hotend Dual-Gear Direct Extruder Build Volume 8.66x8.66x9.84 inch, view 13 Creality K1 3D Printer with Auto Leveling 600mm/s Printing Speed 2000mm/s² Acceleration, 300℃ High-Temp 32mm³/s Flow Hotend Dual-Gear Direct Extruder Build Volume 8.66x8.66x9.84 inch, view 14 Creality K1 3D Printer with Auto Leveling 600mm/s Printing Speed 2000mm/s² Acceleration, 300℃ High-Temp 32mm³/s Flow Hotend Dual-Gear Direct Extruder Build Volume 8.66x8.66x9.84 inch, view 15
Product gallery, 15 images
$369.00$399.00 8% off Check price on Amazon

Prices shown were correct on September 26, 2026 and change frequently.

TL;DRThe Short Answer: Is the Comgrow Creality K1 Printer Worth It?

Speed is the easy part of the Creality K1's pitch; keeping a fast hotend from clogging inside a closed chamber is the hard part. On paper it is a strong machine for anyone who wants to skip bed leveling and long waits, with 600 mm/s printing, a 300C high-flow hotend and strain-sensor auto leveling. It suits patient hobbyists willing to tune cooling and keep an eye on long prints. The catch worth reading about is heat creep with the lid on.

NoFussDeal rates the Comgrow Creality K1 Printer 4.1 out of 5 at $369.00. Last updated September 26, 2026.

Key Facts

Product Dimensions
25"D x 15"W x 22"H
Material
Glass and Aluminum
Color
K1C
Item Weight
27.3 pounds
Brand
Comgrow

What Stands Out

  1. Print speed of up to 600 mm/s, with a G-sensor to reduce ringing at high speed
  2. Ceramic heater around the hotend: 200 degrees in 40 seconds, 300C maximum, 32 mm^3/s flow
  3. All-metal dual-gear "Sprite" direct extruder rated at 80 Newtons of extrusion force
  4. Strain sensor in the heatbed for auto leveling, plus one-tap self-inspection before a job
  5. Prints from a USB drive or over LAN; 8.66 x 8.66 x 9.84 inch build volume
  6. Heat-creep clogs can become frequent with the lid on

Strengths and Drawbacks

What works

  • 600 mm/s printing speed with a G-sensor to resolve ringing at high speed
  • 300C maximum temperature and 32 mm^3/s flow from a ceramic heater that wraps the hotend
  • Strain-sensor auto leveling and one-tap self-inspection remove manual bed leveling
  • All-metal dual-gear direct extruder rated at 80 Newtons, built for TPU
  • One owner rates its precision as good and found it quick with PLA and PETG
  • Prints from a USB drive or over LAN

What does not

  • One owner reports heat-creep clogs, nearly certain with the lid on and PLA
  • The workarounds, pausing mid-print or leaving the lid off, undercut the enclosure
  • Creality says TPU prints well; the same owner found TPU a clog trigger
  • Creality quotes acceleration as 20,000 mm/s^2 in one place and 2000 mm/s^2 in another
  • Sold with a K1C model number while described as the K1, so check what arrives
  • Owner feedback specific to the K1 is still thin

Features in Depth

01

600 mm/s Printing Speed and 20,000 mm/s² Acceleration

Max Print Speed 600 mm/s Max Acceleration 20,000 mm/s² Max Hotend Temp 300 C

Creality claims a maximum printing speed of 600 millimeters per second with 20,000 millimeters per square second acceleration. Speed alone is not the full story with 3D printing, though: acceleration determines how quickly the print head can actually reach and hold that top speed through the direction changes a real model's geometry demands, and pushing speed hard can introduce ringing or ghosting artifacts on sharp corners unless tuning and cooling keep pace. Creality answers that with a G-sensor meant to resolve ringing at high speed. It also claims a max flow rate of 32 cubic millimeters per second through a new ceramic heater encircling the entire hotend, which reaches 200 degrees in 40 seconds and tops out at 300 degrees Celsius, hot enough to take the K1 beyond standard PLA.

$369.00 4.1/5 Check price
02

Dual-Gear Direct Extruder and Auto Leveling

Extruder Type Dual-gear, direct Auto Leveling One-tap self-inspection Extrusion Force 80 Newtons

Creality fits an all-metal, dual-gear direct extruder it calls the Sprite, meaning the filament-feeding mechanism sits right at the print head rather than being mounted remotely and pushing filament through a long tube. A direct setup generally gives more consistent feeding and better control over flexible filaments like TPU, which Creality specifically names as supported, and the brand rates the Sprite at 80 Newtons of extrusion force. Auto leveling with one-tap self-inspection addresses what is historically one of the most frustrating parts of getting into 3D printing: manually leveling the bed by feel before every print. Creality puts a strain sensor in the heatbed for that job, so leveling happens without any input from you.

$369.00 4.1/5 Check price
03

Cooling, Enclosure and the Heat-Creep Caveat

Ringing Control G-sensor Cooling Dual print-head fans + chamber fan Print Modes USB drive or LAN

Creality builds the K1 to keep fast prints clean: a G-sensor to counter ringing at high speed, accurate Z-axis positioning for less Z-banding, and dual fans with directional air ducts on the print head plus an auxiliary fan in the build chamber. Jobs can be sent from a USB drive or over LAN. The enclosure is where owner experience can diverge from the pitch: with the lid on, heat can creep up the hotend and melt filament too early, causing clogs, especially with PLA, on tall prints and with TPU. Adding cooling, pausing partway through a long print or leaving the lid off can help, and slicer settings may play a part. In practice that means watching your first few long prints closely and being ready to pause and clear a clog before it ruins the job.

$369.00 4.1/5 Check price
04

Getting Started and Getting Support

Pre-Print Check One-tap self-inspection Seller Support Comgrow, 20+ technical staff Build Materials Glass and aluminum

Creality designs the K1 to take the usual chores out of starting a print: one-tap self-inspection checks the machine before a job, and the strain sensor levels the bed without any input from you. That matters, because on a fast, high-flow machine the learning curve sits in tuning: slicer settings, cooling and speed all interact, and getting them wrong can show up as clogs. Comgrow, which sells the printer on Amazon, describes itself as the first Amazon seller of Creality 3D printers and says it has more than 20 technical staff for after-sales support, and Creality's own support resources are worth bookmarking before your first print. For a hobbyist or small-shop buyer, the specification is strong for the money, provided you go in ready to tune and watch the machine rather than expecting unattended, plug-and-play printing.

$369.00 4.1/5 Check price

How We Scored It

Based on
The manufacturer's published specifications and the product's live Amazon listing.
Owner rating
4.3 out of 5 on Amazon, recorded September 26, 2026
How we score
We score each thing that comes up most in owner feedback on the Creality K1 3D Printer with Auto. Eight things come up most in owner feedback: three draw praise, three split opinion and two draw mostly complaints. Its ratings average 4.3 stars (70% five stars, 13% four, 5% three and 12% one or two), so every score starts at 86, that average on a 100 point scale. Where opinion is split, we take off 6. Where it draws mostly complaints, we take off 12. Then we read ten owner reviews in full (every one we found gave it four or five stars) and move the score up to 5 points either way depending on how the owners who mention it rated the product. Our overall score starts from the same 4.3 star average and loses 0.1 for each thing that draws mostly complaints, with 0.1 more when at least a tenth of ratings are one star, never more than 0.3 in all. Here that takes off 0.2, which gives 4.1. Read our editorial standards

Quality

Six of the ten owner reviews we read mention it. All of them gave the product four or five stars. Score 91: we started at 86 and added 5 because the owner reviews that mention it are positive.

91Positive

Print Quality

Eight of the ten owner reviews we read mention it, and those owners gave the product four or five stars, so the complaints come from the wider group of buyers. None of the reviews we read say what goes wrong, so this score rests on the buyer ratings. 17% of all ratings are three stars or fewer, which is where complaints like this usually sit. Score 80: we started at 86 and took off 6 because opini…

Read the full note (412 characters)

Eight of the ten owner reviews we read mention it, and those owners gave the product four or five stars, so the complaints come from the wider group of buyers. None of the reviews we read say what goes wrong, so this score rests on the buyer ratings. 17% of all ratings are three stars or fewer, which is where complaints like this usually sit. Score 80: we started at 86 and took off 6 because opinion is split.

80Mixed

Build Quality

Six of the ten owner reviews we read mention it, and those owners gave the product four or five stars, so the complaints come from the wider group of buyers. None of the reviews we read say what goes wrong, so this score rests on the buyer ratings. 17% of all ratings are three stars or fewer, which is where complaints like this usually sit. Score 80: we started at 86 and took off 6 because opinion…

Read the full note (410 characters)

Six of the ten owner reviews we read mention it, and those owners gave the product four or five stars, so the complaints come from the wider group of buyers. None of the reviews we read say what goes wrong, so this score rests on the buyer ratings. 17% of all ratings are three stars or fewer, which is where complaints like this usually sit. Score 80: we started at 86 and took off 6 because opinion is split.

80Mixed

Ease Of Use

Five of the ten owner reviews we read mention it, and those owners gave the product four or five stars, so the complaints come from the wider group of buyers. None of the reviews we read say what goes wrong, so this score rests on the buyer ratings. 17% of all ratings are three stars or fewer, which is where complaints like this usually sit. Score 80: we started at 86 and took off 6 because opinio…

Read the full note (411 characters)

Five of the ten owner reviews we read mention it, and those owners gave the product four or five stars, so the complaints come from the wider group of buyers. None of the reviews we read say what goes wrong, so this score rests on the buyer ratings. 17% of all ratings are three stars or fewer, which is where complaints like this usually sit. Score 80: we started at 86 and took off 6 because opinion is split.

80Mixed

Instructions

Two of the ten owner reviews we read mention it, and those owners gave the product four or five stars, so the complaints come from the wider group of buyers. None of the reviews we read say what goes wrong, so this score rests on the buyer ratings. 17% of all ratings are three stars or fewer, which is where complaints like this usually sit. Score 74: we started at 86 and took off 12 because it dra…

Read the full note (421 characters)

Two of the ten owner reviews we read mention it, and those owners gave the product four or five stars, so the complaints come from the wider group of buyers. None of the reviews we read say what goes wrong, so this score rests on the buyer ratings. 17% of all ratings are three stars or fewer, which is where complaints like this usually sit. Score 74: we started at 86 and took off 12 because it draws mostly complaints.

74Needs Improvement

Durability

Two of the ten owner reviews we read mention it, and those owners gave the product four or five stars, so the complaints come from the wider group of buyers. None of the reviews we read say what goes wrong, so this score rests on the buyer ratings. 17% of all ratings are three stars or fewer, which is where complaints like this usually sit. Score 74: we started at 86 and took off 12 because it dra…

Read the full note (421 characters)

Two of the ten owner reviews we read mention it, and those owners gave the product four or five stars, so the complaints come from the wider group of buyers. None of the reviews we read say what goes wrong, so this score rests on the buyer ratings. 17% of all ratings are three stars or fewer, which is where complaints like this usually sit. Score 74: we started at 86 and took off 12 because it draws mostly complaints.

74Needs Improvement

Owner Satisfaction

70% of ratings are five stars and 13% are four. 5% are three stars and 12% are one or two. The spread skews positive, but enough ratings sit low that the drawbacks below are worth reading. Score 86: its 4.3 star average on a 100 point scale.

86Mostly Positive

Specifications

Size and weight

Product Dimensions
25"D x 15"W x 22"H
Item Weight
27.3 pounds

Materials and warranty

Material
Glass and Aluminum
Color
K1C

Other specifications

Brand
Comgrow

What Buyers Say

Based on 9,983 Amazon customer ratings, averaging 4.3 out of 5, recorded 12 September 2026. See the reviews on Amazon

5 stars 70%
4 stars 13%
3 stars 5%
2 stars 3%
1 stars 9%
★★★★★

Fantastic first-time machine

I am very impressed by my first 3D printer - I got it for prototyping cast metal parts, and I knew it would be a rabbit hole of learning a whole new technology. But this printer has made it … Read it on Amazon
Paul W. · June 26, 2019 · Verified
★★★★★

Ender 3 Pro is both Professional with a few upgrades and Beginner as is NICE

I was really surprised at what this printer can do. I have 5 of them now and use them for production parts in my valve and machine. I even print sprockets using a chain drive and PC carbon f… Read it on Amazon
James Arjuna Sr · September 1, 2021 · Verified
★★★★★

Excellent starter (and beyond) 3D printer

I am completely pleased with this printer and don't see spending more money would add any value or improve prints, all around excellent.Product arrived perfectly, excellent packaging, all pa… Read it on Amazon
photonashville · December 30, 2018 · Verified
★★★★☆

Good for the price, but keep some things in mind

Good precision and capability for a mid-range printer, comes with most things people will need. Could be bigger, but it is a smaller model, so that's not too surprising. Prints fairly quick … Read it on Amazon
Justin Frattallone · July 6, 2026 · Verified
★★★★★

First time printer, very happy, high quality.

I am AMAZED by how much qualtiy Creality can deliver for the rock bottom price. The whole look and feel of this machine is quality and stability. So well done!I bought the printer so I could… Read it on Amazon
Jason MacLeod · February 22, 2020 · Verified
★★★★★

Amazing value, NOT for "plug and play" people

I will say this first: I am absolutely shocked at the quality of print from this thing for $275 -- it's genuinely the greatest bang for your buck that you're going to find in the 3D printer … Read it on Amazon
Bobby Page · June 28, 2020 · Verified

Setting It Up

  1. Choose a spot for it

    Creality gives dimensions of 25 x 15 x 22 inches and a weight of 27.3 pounds, so clear a sturdy surface with room around the machine before unboxing.

  2. Check which model you received

    Creality makes both the K1 and the closely related K1C, and this product carries the K1C model number while its features describe the K1. Check that the label on the box matches what you ordered.

  3. Run the one-tap self-inspection

    Creality's one-tap self-inspection checks the machine and helps you start a printing job easily.

  4. Let the printer level the bed

    The strain sensor in the heatbed handles auto leveling without any input from you.

  5. Load filament and send a job

    Feed filament into the dual-gear direct extruder, then print from a USB drive or send the job over LAN.

  6. Watch the first prints

    One owner advises keeping an eye on prints and being ready to pause and unclog before a print is ruined, especially with the lid closed.

Common Questions

Can I print with the lid closed?

You can, but watch it closely. Heat can creep up the hotend with the lid on and cause clogs, especially with PLA, on tall prints and with TPU. Adding cooling, pausing partway through a long print or leaving the lid off can help, and slicer settings may play a part, so treat your first long enclosed prints as a test run.

Why does 'Comgrow' show up as the brand instead of Creality?

Comgrow sells the printer on Amazon and Creality 3D makes it. Comgrow describes itself as the first seller of Creality 3D printers on Amazon and says it has more than 20 technical staff for after-sales support, so it is the first port of call if something goes wrong.

Where can I get better setup help?

Start with the seller: Comgrow says it has more than 20 technical staff for after-sales support. Creality's own support resources and online owner communities (forums, video walkthroughs) are also worth bookmarking, particularly for tuning speed, cooling and slicer settings safely.

Do I need to watch it while it prints?

On long jobs, yes, at least until you have its cooling dialled in. Heat-creep clogs can strike mid-print, and one caught early is far easier to clear than one found after hours of failed printing. Keep an eye on the print and be ready to pause and unclog before the job is ruined.

Can it actually hit 600 mm/s in real prints, or is that just a spec sheet number?

That is Creality's claimed maximum, and like most printer speed claims, real-world usable speed depends heavily on the specific model's geometry, the filament, and how well the machine is tuned: sharp corners and fine detail generally force lower effective speeds than a flat, simple shape. Creality adds a G-sensor to counter ringing at speed, but expect some tuning before complex prints come out clean.

Is it good for a complete beginner to 3D printing?

Creality aims the K1 at an easy start: one-tap self-inspection before a job and a strain sensor in the heatbed that levels it automatically, removing the manual leveling that trips up many first-time owners. As a first printer it can be surprisingly easy to use once you get the hang of it. The heat-creep caveat means a beginner should watch early prints closely and be ready to adjust cooling.

On Video

6 videos

Creality K1 1st Problem! 😟

FTBT 3D
All videos
  1. Creality K1 1st Problem! 😟 FTBT 3D
  2. Creality K1 Max w/ Upgraded Bondtech Extruder RogueRC
  3. Drop In Upgrade For Creality K1 Printers (DXC Extruder) ModBot
  4. New Creality K1C New Extruder? JJ Shankles
  5. Creality K1C, K1 Max, Ender 3 V3/Plus Under Extrusion EightSixty Concepts
  6. K1 DXC Extruder #k1 #extruder #3dprinting #phaetus #d3vil #creality #Omranello #new #max #DXC Ski3D

The Verdict

4.1Out of 5

The Creality K1 has an impressive specification: 600 mm/s speed, a 300C hotend with 32 mm^3/s flow, an 80 Newton dual-gear direct extruder, automatic strain-sensor leveling and USB or LAN printing. One owner who clearly describes this enclosed printer likes its precision and speed and found it easy to learn as a first printer, but reports heat-creep clogs that become nearly certain with the lid closed and PLA loaded, and that also strike on tall prints and TPU. They describe workarounds and suspect their settings may be partly responsible, yet the fix they describe, running an enclosed printer open or pausing it mid-job, is not what buyers of an enclosed machine expect. Owner feedback specific to the K1 is still thin, so it is too early to say whether that problem is typical.

Who should buy it

  • Makers who want fast PLA and PETG prints and are willing to tune cooling and slicer settings
  • Beginners who want automatic bed leveling instead of adjusting screws by hand
  • Buyers comfortable monitoring prints and clearing an occasional clog
  • Anyone happy to print PLA with the lid open, as one owner does to avoid clogs

Buy the K1 for its speed and hands-free leveling if you enjoy tinkering. If you need reliable, unattended printing with the enclosure closed, the heat-creep report is reason to wait for more owner feedback before committing.

Check price on Amazon

More Reviews

Canon 4.0

Canon PIXMA TS4320 Wireless Color Inkjet Printer for Duplex Printing, Wh…

 KODAK 4.4

KODAK Step Instant Smartphone Photo Printer - Portable Mini Color Wirele…

 Phomemo 4.3

Phomemo D30 Label Maker Machine, Bluetooth Mini Label Maker for Kids Sch…